HEIGHT:  12 mm
ID:  12 mm
OD:  17 mm

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.3100"

HEIGHT:  12 mm
ID:  0.0500"
OD:  17 mm

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.2700"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.5100"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.4600"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.5900"

HEIGHT:  12 mm
ID:  0.0500"
OD:  0.2700"

HEIGHT:  12 mm
ID:  0.0500"
OD:  0.7600"

HEIGHT:  12 mm
ID:  0.3130"
OD:  0.3900"

HEIGHT:  12 mm
ID:  0.3750"
OD:  0.4100"

Replaces OEM#: Scag 424367
Fits Hustler, John Deere also.
The benefit of using this is that it keeps dirt and debris away from the bearing to keep it running smoother and longer.
This can be used to protect any idler that has an unprotected bearing.
HEIGHT: 1/4"
ID: 3/8"
OD: 2"

150-300 Starter pulley for Homelite
Replaces:
HOMELITE 97768-A
HOMELITE 97768-B
HOMELITE PS03117
HOMELITE UP-05460
HOMELITE UP05460

Replaces OEM#: Dixon 539124278, 1713
USED ON DIXON CONE DRIVE MODELS.
ID:  1/2"
OD:  2"
WIDTH:  1"
(PLASTIC)

Replaces OEM#: AYP/Husqvarna 166042, 532166042
Belt Idler Pulley for Self-Propelled Walkbehind AYP Mowers.
Composite; Glass Filled Nylon.
ID: 10 mm
Inside Flange OD: 1-3/8"
Outside Flange OD: 2"
Inside Flange Width: 3/8"
Outside Flange Width: 5/8"

Replaces OEM #: SNAPPER/KEES 1-2124, 7012124
FITS SNAPPER SELF-PROPELLED COMMERCIAL SERIES MOWERS.
ID:  1/4"
OD:  2-1/4"
WIDTH:  1/2"

ID: 3/8"
NO. OF TEETH: 10
OD: 1.8400"
CHAIN SIZE: 40, 41

ID:  3/8"
NO. OF TEETH:  14
OD:  2.4900"
CHAIN SIZE: 40, 41

ID:  1/2"
KEYWAY:  1/8"
OD:  2"

ID:  5/8"
KEYWAY:  3/16"
OD:  2"

ID:  1/2"
KEYWAY:  1/8"
OD:  2-1/4"

ID: 11/16"
Inside Flange OD: 2-1/2"
Outside Flange OD: 2-31/32"
Inside Flange Width: 1"
Outside Flange Width: 1-3/16"

Replaces OEM #: AYP/ROPER/SEARS 129861, 153535, 173436, 177865
ARIENS 21546127
HUSQVARNA 532129861, 532173436
Fits 42" deck models 7147A29, 7167A29 and 7147B29.
SPLINED ID
ID: 5/8"
OD: 5-3/16"
WIDTH: 7/8"

ID:  3/4"
KEYWAY:  3/16"
OD:  3"

ID:  3/8"
OD:  2-1/4"
WIDTH:  1-1/4"

ID:  5/8"
KEYWAY:  3/16"
OD:  3-1/4"

ID:  3/4"
KEYWAY:  3/16"
OD:  3-1/4"

Replaces OEM #: SIMPLICITY/ALLIS CHA 117414
ID:  3/8"
OD:  2-1/8"
WIDTH:  1/2"

ID:  5/8"
KEYWAY:  3/16"
OD:  3-1/2"

ID:  3/4"
KEYWAY:  3/16"
OD:  3-1/2"

Replaces OEM #: AMF/DYNAMARK/NOMA 45074
ID:  3/8"
OD:  3-1/16"
WIDTH:  3/4"

Replaces OEM#: Murray 91178, 420613, 420613MA
Fits Murray 25", 30", 36" rear engine riders model 7-35500, 7-30502 and 7-25501.
Composite: glass filled nylon.
ID:  1/2"
OD:  3"
WIDTH:  11/16"

Replaces SIMPLICITY/ALLIS CHA: 1657827, 1685149
SNAPPER/KEES: 14340, 7014340, 7014340YP
ID: 3/8"
OD: 2-1/2"
WIDTH: 13/16"

Replaces OEM#: MTD 756-0243, Toro Wheel Horse 25-5880
ID: 3/8"
OD: 1-7/8"
WIDTH: 15/16"
WITHOUT FLANGE.

ID:  5/8"
KEYWAY:  3/16"
OD:  4"

Replaces OEM #: AYP/ROPER/SEARS 129206, 153532, 173435
HUSQVARNA 532129206, 532153532, 532173435
Fits AYP 38" cut mowers.
Double Hex ID
ID:  41/64"
OD:  4-13/16"
WIDTH:  31/32"

Replaces OEM#: Hustler 794404
FITS MINI Z & MINI FASTRAK.
HEIGHT: 3/4"
ID: 11/16"
OD: 3-1/8"
COMPOSITE HYDRO IDLER PULLEY

Replaces Murray 690549, 690549MA
ID: 11/16"
OD: 4-5/8"
WIDTH: 1"

REPLACES MURRAY 690387, 690451, 690387MA
ID: 11/16"
OD: 4-11/16"
WIDTH: 1-3/8"

ID:  7/8"
KEYWAY:  3/16"
OD:  3"

REPLACES OEM#: JOHN DEERE GY20067, GY22172
Fits L100-L130 Series 42" & 48".
Also fits Sabre Models: 14542GS,1642HS,1742HS & 17542HS Lawn Tractors.
Scotts Models: L1742, L17542,L2048 & L2548 Lawn Tractors.
HEIGHT: 1-3/16"
ID: 11/16"
OD: 3-5/8"

Replaces OEM: MURRAY 421409, 91179, 91179MA, 091179MA, 421409, 421409MA
ID: 1/2"
OD: 3-23/64"
WIDTH: 7/8"

Replaces John Deere  AM115459
FOR SERIES LX, GX AND SABRE MODELS. COMPOSITE.
BELT WIDTH:  0.7500"
HEIGHT:  1-1/32"
ID:  0.4100"
OD:  3.5000"

Replaces OEM#: AYP/ROPER/SEARS 104679X
BOLENS 172-4488
CUB CADET/INTERNATIONAL 491395-R1
JOHN DEERE AM-41647
SIMPLICITY/ALLIS CHA 108386, 2108386, 2108386SM
TORO/WHEEL HORSE 11-2425, 92-7101
ID: 3/8"
OD: 2-15/32"
WIDTH: 1"

ID:  3/8"
OD:  2-3/4"
WIDTH:  1-3/16"

ID:  7/8"
KEYWAY:  3/16"
OD:  3-1/2"

ID:  7/8"
KEYWAY:  3/16"
OD:  4"

ID:  1"
KEYWAY:  1/4"
OD:  3"

ID: 1"
KEYWAY: 1/4"
OD: 3-1/2"
HUB HEIGHT: 1"

Replaces OEM#: Murray 23339, 23339MA
ID:  1/2"
OD:  4"
WIDTH:  15/16"

Replaces Murray 21409, 21409MA
ID: 1/2"
OD: 3-3/16"
WIDTH: 7/8"

ID: 17 mm
OD: 5"
WIDTH: 0.8700"

Replaces OEM#: Scag 482306, 483213, 48473
FITS SCAG.  
COMPOSITE; GLASS FILLED NYLON.
HEIGHT:  1-1/4"
ID:  3/8"
OD:  4-1/2"

Replaces OEM#: AYP 194326, Husqvarna 532194326
Composite Plastic
HEIGHT: 1-1/2"
ID: 3/8"
OD: 3-1/2"

REPLACES MURRAY 423238 supersedes to 423238MA
4" Plastic Flat Idler

Replaces John Deere  AM115460
FITS EZ TRAK, LX, GT, X300R AND OTHERS.
BELT WIDTH:  3/8"
HEIGHT:  0.9000"
ID:  21/32"
OD:  2-7/8"
COMPOSITE.

Replaces OEM: MTD, Cub Cadet, Troy-bilt, White #756-0124, 756-0252, 756-0251
HEIGHT: 3/4"
ID: .625
Width 5"
Off Set 1.25 Width - 3/4" Height

Replaces MTD 756-04356
Fits 46" 2 Blade Decks
Width 1/2"
ID 12 Point
OD 6-1/2"

HEIGHT: 3/4"
ID: 5/8"
OD: 3-1/2"
5L(B) or 4L(A)1/2

Replaces OEM #: AMF/DYNAMARK/NOMA 57736
CUB CADET/INTERNATIONAL 542520-R91
MASSEY FERGUSON 511-450-M1
ID:  3/8"
OD:  4-1/2"
WIDTH:  3/4"

Replaces Cub Cadet 756-04216
HEIGHT:  1"
ID:  12 point hex
ID:  5/8"
OD:  5.4500"

Replaces OEM#: MTD 756-0980
FITS 600 SERIES MTD MOWERS.
ID:  12 PT SPLINE
OD:  5-3/4"
WIDTH:  1"

Replaces John Deere AM107334, AM121967
Fits LT 133 150 155 160 170 180 190 STX 38 46, Sabre
& GX series Riders/LT & LTX series Lawn Tractor.
ID: 0.3160"
Belt Groove: 3/8"
OD: 2-7/8"
Material: Composite

Murray; Yard King 52" deck RT Pulley Cover

Replaces OEM #: AYP 173437, Husqvarna 532173437
Fits 42" decks from 2000 and newer
HEIGHT: 1-1/4"
ID: 3/8"
OD: 3-7/8"

Replaces OEM#: Cub Cadet 756-1188
HEIGHT:  5/8"
ID:  12 POINT HEX
OD:  5-9/16"

HEIGHT: 7/8"
ID: 1/2"
OD: 4";
2 1/8" center hole to center hole; .3 hole

Replaces Ariens 01213200, 12132, 1213200, 02457400, 52007000
Also replaces John Deere M124285
Fits Ariens 922003, 924028, 924029, 932000
ID: 5/16"
OD: 2-1/2"
WIDTH: 13/16"

Replaces OEM#: SNAPPER/KEES 1-8585, 23966, 7023966
ID:  3/8"
OD:  4-7/8"
WIDTH:  3/4"

Replaces MTD 706-15708, 756-0319
PUL:IDLR:FLAT 1.88 OD

Replaces OEM: 123674X, 532004859, 532123688
Height: 7/8 "
ID: 3/8 "
OD: 3 9/16 "

Replaces John Deere GY00054
OD: 3-1/2"
Flat OD: 2-3/4"
Flat Width: 3/4"
Overall Width: 1-1/8
ID: 1/4"
Offset: 3/8"

Replaces OEM#: 494199, 494199MA
Fits 42" cut, splined shaft.
OD 5-3/8"
ID 9/16"
Height 1/2"

Replaces OEM#: Murray 23211, 23211MA
BELT WIDTH:  1/2"
ID:  1/2"
OD:  3-3/4"
WIDTH:  5/8"

Replaces OEM #: AYP 175820, Husqvarna 532175820
Fits 48" decks from 2001 and newer
HEIGHT:  1-1/16"
ID:  3/8"
OD:  4-1/2"

ID:  1/2"
KEYWAY:  1/8"
OD:  2-1/4"

DR COMMERCIAL 825 PUSH E/S DRTRM067E
DR COMMERCIAL 825 P/DRIVE DRTRM067S
DR PRO 650 E/S DRTRM060E
DR PRO 650 RECOIL DRTRM060M
DR PRO
DR SPRINT 625 ELEC/START DRTRM055E
DR SPRINT 625 RECOIL DRTRM055M

ID: .38 OD: 2-1/4" WIDTH: 3/8"

HEIGHT: 1"
ID: 5/8"
OD: 3-3/4"
5L(B) or 4L(A)1/2

Replaces OEM: AYP Sears Craftsman Husqvarna Poulan 174375, 539107521
FITS 48" DECKS.
ID:  5/8"
OD:  4-7/8"

Replaces OEM: Cub Cadet: 01004081, 1004081, 756-1229
Snapper: 1-8585, 23966, 7023966, 7023966YP
Fits Models:
Specs:
Height: 1 1/4"
ID: 3/8"
OD: 4 15/16"
Material: Metal
Heavy-Duty/Standard: Heavy-duty
Explanation of Letters: Refer to the drawing by clicking on More Info
Idler A: 5"
Idler B: 4 3/8"
Idler C: 3/8"
Idler D: 1"
Idler E: 9/16"
Idler F: 1/4"
Idler H: 13/32"
Idler V: 1 1/4"

Replaces OEM# Scag 48141
Ferris 20819
HEIGHT:  1-3/16"
ID:  1"
KEYWAY:  1/4"
OD:  2-1/2"

Replaces John Deere  AM135526
FITS JOHN DEERE X300 SERIES.
HEIGHT:  1-1/4"
ID:  0.6690"
OD:  5-1/4"

Replaces Dixie Chopper 30234, Toro/Wheel Horse 65-5948
HEAVY DUTY RIVETED PULLEY.
HEIGHT:  1"
ID:  5/8"
OD:  4-3/8"

Replaces OEM#: MTD 756-0556, 956-0556
FITS MTD 42" "G" SERIES DECK.  
SPLINED ID.  
ID:  3/4"
OD:  5-1/2"
WIDTH:  2-1/2"

TAPERED HUB REPLACES SCAG #482085.
INCLUDES (2) SCREWS.
HEIGHT:  1-1/4"
ID:  15 mm
KEYWAY:  3/16"
OD:  2"

Replaces Murray 7769222

Replaces Murray 1001187

Replaces OEM#: Murray 90118, 490118, 490118MA
ID:  1/2"
OD:  4-3/4"
WIDTH:  27/32"

Replaces OEM #: AYP 144917
FITS SPINDLES ON 46" DECKS.
HEIGHT:  1-1/2"
ID:  5/8"
OD:  4"